Stainless Steel Bollard Covers – Learn More..

Creating harmony in the midst of heavy foot or vehicle traffic is quite tough, especially if you own a commercial building. This is often an issue in shopping malls, restaurants, or other crowded places, which explains why certain regulations are necessary for a more organised operation. But besides these rules, it is additionally important that you give people some visual signs of what these rules are, as stainless bollards so people will be made aware that there are rules to be followed.

Bollards in Public Places – Bollards are generally found in public areas, and you may find parking bollards in streets with heavy traffic or facing buildings which need defense against vehicles. Some are even used as an alternative to cycle racks. Others would even allow these bikes to become locked for security purposes.

When bollards are installed, it is mainly to reinforce security and safety. They may be visual indicators that no unauthorised person is allowed to enter an area, that is often signified with the help of a chain connecting the bollards. This means that individuals are banned to enter the region that is cordoned with bollards.

All steel bollards are galvanised to BS EN ISO 1461 and have the choice of powder coating to any BS or RAL colour. Mild steel tube comes in varying thicknesses 60mm up to 114mm diameter use a 3mm thick wall. Diameters above this are 5mm thick as standard. Mild steel tube comes in larger wall thicknesses to offer the ultimate safety barriers.

Of very low maintenance, steel requires only occasional cleaning with tepid water and soap or even a mild detergent. In heavy industrial areas or areas of a very high volume of traffic bollards might be subject to more deposits, to be able to retain the desired finish a far more frequent maintenance programme is usually recommended. Stainless Steel Bollard Covers

Areas requiring vehicle access in the daytime and need a safe and secure area during the night can utilise a telescopic bollard. The bollards use a light lifting weight, approximately 15kgs, and retract to ground level making it possible for continued vehicle access. Once the bollard is lifted and kept in put it provides high security for the area, this design can also be manufactured in a thicker steel wall to supply anti ram resistance.

There are many materials utilized to make bollards. It could be stone, concrete or steel. Concrete bollards are permanently installed while steel bollards can be found with extra features, like being sound sensitive or automated. Fixed bollards have light reflectors to permit people know where they are located, particularly the drivers. Minus the reflectors, they may easily cause accidents to occur inside the streets.

The installation of bollards, whether they are utilized as an alternative to get a bike stand or not, depends on which kind of bollards you may have chosen. Fixed bollards have to be installed into concrete or with new foundations. Factors miecfq as the soil condition and design need to be carefully examined at first.

On the contrary, removable or manufactured bollards often include their mounting systems. Even when they have to become mounted by themselves, no drilling is necessary to install these types of bollards. They don’t have to be glued to the floor either with epoxy or similar materials.

Retractable bollards are also available. At first, they could seem like layered telescopes that can be used with manual or automatic features, based on your decision. Manual bollards need to be lifted with the aid of lift-assistance mechanisms while automated bollards use hydraulics and electricity.

Leave a comment

Your email address will not be published. Required fields are marked *